This is not the latest approved version of this apprenticeship. View the latest version
T Levels focus on vocational skills and can help students into skilled employment, higher study or apprenticeships. Each T Level includes an in-depth industry placement that lasts at least 45 days. Students get valuable experience in the workplace; employers get early sight of the new talent in their industry.
This occupation is found in the electrical products sector. Electrical, electronic product service and installation engineers may work for organisations of all sizes ranging from large multinational companies to small independent repair shops. Engineers usually work from home. They normally require a driving licence to enable them to drive safely to commercial or domestic premises in their given area. Engineers install, service or repair a range of electrical or electronic equipment, from washing machines and micro-wave ovens in the kitchen, laundrette or restaurant to television and audio equipment in the living room. Once the installation is complete, they demonstrate the product and provide information and advice on efficient operation and resource saving practices. 'Smart home technology' means that the installation requirements of many appliances require the engineer to set up connectivity. For example using WiFi and bluetooth, enables products to communicate through the 'internet of things' and be controlled with 'Apps'. Engineers also repair and service electrical products for commercial or domestic customers. This involves testing equipment to find faults, carrying out repairs and replacing faulty parts.
In their daily work the engineer comes into contact with customers. They represent their employer so providing high levels of customer service for all customers, including individuals in their homes, business owners and managers is an important part of the role. Engineers normally work alone with minimal supervision when out on a job and usually report to a senior engineer.
An employee in this occupation is responsible for following health, safety and electrical installation and repair requirements and procedures. This minimises the risk of harm to themselves, customers, and their families, property and equipment. They must also deliver to customer service standards and timescales.
An engineer is usually responsible for ensuring they carry the spare parts needed to complete their repairs. They must also keep their van and tools in good working condition.
Following the apprenticeship, the engineer may complete additional training to enable them to work on gas appliances or work in specific commercial premises. They may also take additional qualifications to further develop their skills and progress into management, training or development.
| Duty | KSBs |
|---|---|
| Duty 1 Deliver and install electrical or electronic products. |
K1
K2
K3
K4
K6
K7
K10
K11
K14
K15
K19
K20
K21
K22
K23
K24
K25
K26
S2
S3
S6
S8
S10
S12
S13
S14
S18
S21
S22
S23
S24
S26
S27
S28
B1
B2
B3
B4
B5
B6
B7
|
| Duty 2 Prepare for repair, maintenance and installation work, organise resources and carry out software downloads and updates. |
K1
K2
K3
K5
K6
K8
K9
K16
K17
K18
K20
K22
K23
K25
K26
S1
S2
S4
S5
S7
S8
S16
S22
S27
S28
B1
B3
B4
B5
B7
|
| Duty 3 Test equipment, diagnose faults and carry out repair, maintenance and service tasks on electrical or electronic products. |
K1
K2
K3
K4
K11
K12
K13
K17
K18
K19
K20
K21
K22
K23
K24
K25
K26
S2
S6
S11
S17
S18
S20
S21
S22
S26
S27
B1
B2
B3
B4
B5
B7
|
| Duty 4 Provide customer service, technical product information and advice and updates on repair, installation and maintenance work to customers. |
K1
K10
K20
K21
K22
K23
K24
K25
S9
S19
S22
S23
S24
S25
S27
S28
B3
B4
B5
B6
B7
|
| Duty 5 Maintain tools and equipment. |
K1
K3
K5
K20
K22
S2
S7
S22
B1
B3
B4
B5
|
| Duty 6 Provide work information to colleagues and complete task documentation. |
K1
K20
K21
K22
K23
K24
K25
S8
S22
S23
S24
S25
S27
B3
B4
B5
B6
B7
|
| Duty 7 Source and use materials with a focus on sustainability. For example when disposing of waste parts and packaging. |
K1
K3
K5
K6
K8
K16
K19
K20
K21
K22
K23
K24
K25
K26
S2
S3
S5
S6
S15
S16
S18
S21
S22
S24
S27
S28
B1
B2
B3
B4
B5
B7
|
K1: The electrical and electronic products industry. Types of organisations Types of products. Supply chain. Customers. Customer requirements. Impacts on product demand.
Back to Duty
K2: Stock requirements. Control systems. Stock considerations: availability, stock lead time, stock value and faulty stock.
Back to Duty
K3: Awareness of health and safety regulations, relevant to the engineer's responsibilities. Control of Substances Hazardous to Health (COSHH). Display Screen Equipment. Due diligence. Electrical safety and compliance. Emergency procedures. Health and Safety at Work Act – responsibilities. Isolation and emergency stop procedures. Lone working. Manual handling. Provision and use of Work Equipment Regulations (PUWER). Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations (RIDDOR). Risk assessments. Safe systems of work. Safety equipment: fire extinguishers. Situational awareness. Slips, trips and falls. Types of hazards. Personal Protective Equipment (PPE).
Back to Duty
K4: Environmental and sustainability principles, regulations and guidance. Environmental hazards that can arise from product repair, service and installation. Environmental management systems standard. Environmental Protection Act. Environmental permits. Waste Electrical and Electronic Equipment Directive (WEEE). Hazardous waste regulations and disposal of waste. Circular economy and reuse of materials and components. Eco design, energy and resource efficiency. Recycling and disposal of product, components and packaging.
Back to Duty
K5: Tools and equipment used in electrical and electronic product installation, repair and maintenance. Purpose, operation, storage and maintenance.
Back to Duty
K6: Electrical and electronic principles: principles of electricity and electronics, electric circuit theory, electrostatic discharge.
Back to Duty
K7: Manufacturer's installation and site requirements. Ventilation requirements and building structure suitability for installation and fixings.
Back to Duty
K8: Manufacturers’ instructions and service manuals: what they are and how to use them. Warranties: what they are and how they can impact on work.
Back to Duty
K9: Planning and prioritising work tasks. Time management techniques.
Back to Duty
K10: Customer care policies and techniques.
Back to Duty
K11: Electrical services, utility services, network connections and product demonstration.
Back to Duty
K12: Product testing and standards. British Standards. In-service inspection and testing of electrical equipment.
Back to Duty
K13: Principles of product operation and the role of software.
Back to Duty
K14: Delivery practices and techniques, securing and transporting products.
Back to Duty
K15: Installation practices and techniques.
Back to Duty
K16: Service and maintenance practices and techniques.
Back to Duty
K17: Techniques and practices for repairing equipment, and replacing components or reinstating software.
Back to Duty
K18: Fault finding techniques.
Back to Duty
K19: Quality assurance requirements.
Back to Duty
K20: Continuous improvement techniques.
Back to Duty
K21: Principles of equity, diversity, and inclusion in the workplace. Unconscious bias.
Back to Duty
K22: Team working principles.
Back to Duty
K23: Written communication techniques - electronic and paper: report writing, recording information, technical reports.
Back to Duty
K24: Verbal communication techniques. Giving and receiving information. Matching style to audience. Barriers in communication and how to overcome them. Engineering terminology.
Back to Duty
K25: Information technology and digital: digital interfaces, email, Management Information Systems (MIS), spreadsheets, presentation, word processing, virtual communication, learning platforms, work collaboration platforms. General Data Protection Regulation (GDPR). Cyber security.
Back to Duty
K26: Technological development and innovation within electrical and electronic products.
Back to Duty
S1: Obtain and check stock and supplies. Complete returns.
Back to Duty
S2: Apply health and safety procedures and safe systems of work in compliance with regulations and standards.
Back to Duty
S3: Apply environmental and sustainability procedures in compliance with regulations and standards for example, segregate resources for reuse, recycling and disposal.
Back to Duty
S4: Plan work.
Back to Duty
S5: Select, check and use tools and equipment.
Back to Duty
S6: Use electrical, electronic and software operation systems.
Back to Duty
S7: Maintain and store tools and equipment.
Back to Duty
S8: Follow Electrostatic Discharge (ESD) avoidance procedures when handling spare parts and open products.
Back to Duty
S9: Provide information and advice to customers, for example on energy and resource saving and efficient product operation.
Back to Duty
S10: Connect product to the required network for example WiFi, Internet or bluetooth.
Back to Duty
S11: Inspect and test installations for safety and service.
Back to Duty
S12: Apply delivery practices and techniques, secure and transport product. For example fit and remove transit bolts or strapping.
Back to Duty
S13: Install equipment or components.
Back to Duty
S14: Check installation meets installation and site requirements.
Back to Duty
S15: Apply service and maintenance practices and techniques. Assess condition of components and equipment to identify if action is required.
Back to Duty
S16: Disconnect and isolate equipment or components.
Back to Duty
S17: Apply repair practices and techniques, replace components or reinstate software.
Back to Duty
S18: Restore the work area on completion of the activity.
Back to Duty
S19: Demonstrate product.
Back to Duty
S20: Apply fault finding techniques.
Back to Duty
S21: Apply quality assurance procedures.
Back to Duty
S22: Apply continuous improvement techniques. Devise suggestions for improvement.
Back to Duty
S23: Apply teamworking principles.
Back to Duty
S24: Apply equity, diversity and inclusion procedures.
Back to Duty
S25: Communicate in writing and record information - paper based or electronic: for example technical findings or product claim investigation outcomes.
Back to Duty
S26: Communicate with others verbally for example, colleagues, customers and stakeholders.
Back to Duty
S27: Use information and digital technology. Comply with GDPR and cyber security regulations and policies.
Back to Duty
S28: Carry out and record planned and unplanned learning and development activities.
Back to Duty
B1: Put health and safety first.
Back to Duty
B2: Considers the environment and sustainability.
Back to Duty
B3: Act professionally.
Back to Duty
B4: Take responsibility for completing work.
Back to Duty
B5: Committed to continued professional development (CPD) to maintain and enhance competence.
Back to Duty
B6: Supportive of the needs and concerns of others, for example relating to diversity and inclusion.
Back to Duty
B7: Collaborate within teams and external stakeholders.
Back to Duty
Awarding organisation: City & Guilds
Crown copyright © 2025. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence