This is not the latest approved version of this apprenticeship. View the latest version
This apprenticeship has been retired
Setting up machines prior to production as well as monitoring and correcting them as needed.
This occupation is found in the Advanced Manufacturing and Engineering (AME) sector. AME includes Aerospace, Automotive, Maritime Defence, Nuclear and Construction sectors. Machining technicians produce complex and precision machined products that are typically used in machinery. For example, aeroplanes and vehicles. They can also produce bespoke components or products for domestic appliances or medical equipment. They use a variety of machines to carry out their work. For example, centre lathes, vertical and horizontal milling machines, horizontal and cylindrical grinding machines. Electro discharge machines, single and multi-axis Computer Numeric Control (CNC) machine tools centres. Gear cutting and Gear Grinding machines.
The broad purpose of the occupation is to produce complex and precision work by machining components. Components are machined from metal or specialist materials using conventional or CNC machine tools. Machining Technicians interpret information and plan their activities. They also set up, operate, adjust or edit machine tool settings. When using CNC equipment, they can produce, prove or edit programmes. They inspect components and machinery, report issues and support continuous improvement activities. They typically work in a manufacturing environment. Depending on the organisation, they may be required to work at height or work shifts.
In their daily work, an employee in this occupation interacts with other Machining Technicians. They also interact with various stakeholders. They typically report to an engineering or manufacturing team leader. Typically, this would be as part of a defined or cross functional team. They may also interact with customers, suppliers, colleagues, quality auditors and regulators.
An employee in this occupation will be responsible for the quality and accuracy of their work. They also must work efficiently and be productive in the work they undertake. They must work both individually and as part of a larger team. They must work within the relevant health, safety and environmental regulations. This includes the use of appropriate protective clothing and equipment. They are responsible for the correct use and housekeeping of machinery, tools and equipment. All work must be completed in a safe and efficient manner as directed by supervisory staff.
This is a summary of the key things that you – the apprentice and your employer need to know about your end-point assessment (EPA). You and your employer should read the EPA plan for the full details. It has information on assessment method requirements, roles and responsibilities, and re-sits and re-takes.
An EPA is an assessment at the end of your apprenticeship. It will assess you against the knowledge, skills, and behaviours (KSBs) in the occupational standard. Your training will cover the KSBs. The EPA is your opportunity to show an independent assessor how well you can carry out the occupation you have been trained for.
Your employer will choose an end-point assessment organisation (EPAO) to deliver the EPA. Your employer and training provider should tell you what to expect and how to prepare for your EPA.
The length of the training for this apprenticeship is typically 42 months. The EPA period is typically 3 months.
The overall grades available for this apprenticeship are:
When you pass the EPA, you will be awarded your apprenticeship certificate.
The EPA gateway is when the EPAO checks and confirms that you have met any requirements required before you start the EPA. You will only enter the gateway when your employer says you are ready.
The gateway requirements for your EPA are:
For the machining technician, the qualification required is:
EAL L3 Extended diploma in Machining (Development Knowledge)
Pearson BTEC Level 3 Diploma in Advanced Manufacturing Engineering (Machining) (Development Technical Knowledge)
City and Guilds Machining technician (1273)
Practical assessment with questions
You will be observed by an independent assessor completing a set of tasks. It will last 4.5 hours. They will ask you at least 5 questions.
Interview underpinned by a portfolio of evidence
You will have an interview with an independent assessor. It will last at least 60 minutes. They will ask you at least 10 questions. The questions will be about certain aspects of your occupation. You need to compile a portfolio of evidence before the EPA gateway. You can use it to help answer the questions.
Multiple-choice test
You will complete a multiple-choice test. It will be closed book, meaning you will not have access to any books or reference materials.
In the test you can have:
scientific calculator
The test will have 30 multiple-choice questions. You will have 60 minutes to complete it.
The EPAO will confirm where and when each assessment method will take place.
You should speak to your employer if you have a query that relates to your job.
You should speak to your training provider if you have any questions about your training or EPA before it starts.
You should receive detailed information and support from the EPAO before the EPA starts. You should speak to them if you have any questions about your EPA once it has started.
If you have a disability, a physical or mental health condition or other special considerations, you may be able to have a reasonable adjustment that takes this into account. You should speak to your employer, training provider and EPAO and ask them what support you can get. The EPAO will decide if an adjustment is appropriate.
This apprenticeship aligns with Royal Aeronautical Society (RAeS) for Engineering Technician (EngTech)
Please contact the professional body for more details.
This apprenticeship aligns with Institution of Engineering and Technology (IET) for Engineering Technician (EngTech)
Please contact the professional body for more details.
This apprenticeship aligns with Institute of Mechanical Engineers (IMechE) for Engineering Technician (EngTech)
Please contact the professional body for more details.
| Version | Change detail | Earliest start date | Latest start date |
|---|---|---|---|
| 1.5 | Standard and end point assessment plan revised | 25/06/2024 | Not set |
| 1.4 | Standard and end point assessment plan revised | 11/08/2023 | 24/06/2024 |
| 1.3 | Standard and end point assessment plan revised | 01/03/2023 | 10/08/2023 |
| 1.2 | Standard and end point assessment plan revised | 20/12/2022 | 28/02/2023 |
| 1.1 | Standard and end-point assessment plan revised | 24/11/2022 | 19/12/2022 |
| 1.0 | Approved for delivery | 09/11/2022 | 23/11/2022 |
Crown copyright © 2025. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence