Craft technician

This document explains the requirements for end-point assessment (EPA) for the craft technician apprenticeship. End-point assessment organisations (EPAOs) must follow this when designing and delivering the EPA.

Craft technician apprentices, their employers and training providers should read this document.

This is a core and options apprenticeship. An apprentice must be trained and assessed against the core and one option. The options are:

• Ceramicist

• Dye and print technician

A full-time craft technician apprentice typically spends 18 months on-programme. The apprentice must spend at least 12 months on-programme and complete the required amount of off-the-job training in line with the apprenticeship funding rules.

The EPA should be completed within an EPA period lasting typically 3 months.

The apprentice must complete their training and meet the gateway requirements before starting their EPA. The EPA will assess occupational competence.

An approved EPAO must conduct the EPA for this apprenticeship. Employers must work with the training provider to select an approved EPAO from the apprenticeship providers and assessment register (APAR).

This EPA has 2 assessment methods.

The grades available for each assessment method are below.

Assessment method 1 - interview underpinned by a portfolio of evidence:

• fail

• pass

• distinction

Assessment method 2 - project with questioning:

• fail

• pass

• distinction

The result from each assessment method is combined to decide the overall apprenticeship grade. The following grades are available for the apprenticeship:

• fail

• pass

• merit

• distinction

The EPA is taken in the EPA period. The EPA period starts when the EPAO confirms the gateway requirements have been met and is typically 3 months.

The EPAO should confirm the gateway requirements have been met and start the EPA as quickly as possible.

The apprentice’s employer must be content that the apprentice is occupationally competent. That is, they are deemed to be working at or above the level set out in the apprenticeship standard and ready to undertake the EPA. The employer may take advice from the apprentice's training provider, but the employer must make the decision. The apprentice will then enter the gateway.

The apprentice must meet the gateway requirements before starting their EPA.

They must:

• confirm they are ready to take the EPA
• have achieved English and mathematics qualifications in line with the apprenticeship funding rules

• submit a Portfolio of evidence for the interview underpinned by a portfolio of evidence

Portfolio of evidence requirements:

The apprentice must compile a portfolio of evidence during the on-programme period of the apprenticeship. It should only contain evidence related to the KSBs that will be assessed by this assessment method. It will typically contain 20 discrete pieces of evidence. Evidence must be mapped against the KSBs. Evidence may be used to demonstrate more than one KSB; a qualitative as opposed to quantitative approach is suggested.

Evidence sources may include:

• workplace documentation and records
• work products for example: images of models, protypes, finished products
• drawings, models or prototypes
• workplace policies and procedures
• witness statements
• worked examples and samples of experiments
• annotated photographs
• video clips (maximum total duration 10 minutes); the apprentice must be in view and identifiable and evidence the following KSBs
  • Ceramicist: S17 and S18 (making)
  • Dye and print technician: K35, K36, K37, S22, S23 and S27 (dyeing techniques)

This is not a definitive list; other evidence sources can be included.

The portfolio of evidence should not include reflective accounts or any methods of self-assessment. Any employer contributions should focus on direct observation of performance (for example, witness statements) rather than opinions. The evidence provided should be valid and attributable to the apprentice; the portfolio of evidence should contain a statement from the employer and apprentice confirming this.

The EPAO should not assess the portfolio of evidence directly as it underpins the interview. The independent assessor should review the portfolio of evidence to prepare questions for the interview. They are not required to provide feedback after this review.

Gateway evidence must be submitted to the EPAO, along with any organisation specific policies and procedures requested by the EPAO.

The assessment methods can be delivered in any order.

The result of one assessment method does not need to be known before starting the next.

Overview

In the interview, an independent assessor asks the apprentice questions. It gives the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method.

Rationale

This EPA method is being used because:

• it allows for assessment of KSBs that do not occur on a predicable or regular basis and may not naturally be assessed as part of the project,
• it allows for testing of responses where there are a range of potential answers,
• it is a cost effective, as whilst seeking assurance of competence across a range of KSBs, it does not require the independent assessor to directly observe all of them, reducing their time cost and cost of materials.

reduces the assessment burden on the apprentice

Delivery

The interview must be structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method to the highest available grade.

An independent assessor must conduct and assess the interview.

The purpose of the independent assessor’s questions will be to assess the apprentice’s competence against the following themes:

The purpose of the independent assessor's questions will be to cover the following topics:

• history
• business management
• project management
• customer relations
• product management
• tools
• health and safety

Ceramicist

• making

Dye and Print technician

• Dyeing techniques

The EPAO must give an apprentice 2 weeks' notice of the interview.

The independent assessor must have at least 1 weeks to review the supporting documentation.

The apprentice must have access to their portfolio of evidence during the interview.

The apprentice can refer to and illustrate their answers with evidence from their portfolio of evidence however, the portfolio of evidence is not directly assessed.

The interview must last for 60 minutes. The independent assessor can increase the time of the interview by up to 10%. This time is to allow the apprentice to respond to a question if necessary.

The independent assessor must ask at least 10 questions. The independent assessor must use the questions from the EPAO’s question bank or create their own questions in line with the EPAO’s training. Follow-up questions are allowed where clarification is required.

The apprentice may choose to end the assessment method early. The apprentice must be confident they have demonstrated competence against the assessment requirements for the assessment method. The independent assessor or EPAO must ensure the apprentice is fully aware of all assessment requirements. The independent assessor or EPAO cannot suggest or choose to end the assessment methods early, unless in an emergency. The EPAO is responsible for ensuring the apprentice understands the implications of ending an assessment early if they choose to do so. The independent assessor may suggest the assessment continues. The independent assessor must document the apprentice’s request to end the assessment early.

The independent assessor must make the grading decision.

The independent assessor must keep accurate records of the assessment. They must record:

• the apprentice’s answers to questions
• the KSBs demonstrated in answers to questions
• the grade achieved

Assessment location

The interview must take place in a suitable venue selected by the EPAO for example, the EPAO’s or employer’s premises.

The interview can be conducted by video conferencing. The EPAO must have processes in place to verify the identity of the apprentice and ensure the apprentice is not being aided.

The interview should take place in a quiet room, free from distractions and influence.

Question and resource development

The EPAO must develop a purpose-built assessment specification and question bank. It is recommended this is done in consultation with employers of this occupation. The EPAO must maintain the security and confidentiality of EPA materials when consulting with employers. The assessment specification and question bank must be reviewed at least once a year to ensure they remain fit-for-purpose.

The assessment specification must be relevant to the occupation and demonstrate how to assess the KSBs mapped to this assessment method. The EPAO must ensure that questions are refined and developed to a high standard. The questions must be unpredictable. A question bank of sufficient size will support this.

The EPAO must ensure that the apprentice has a different set of questions in the case of re-sits or re-takes.

The EPAO must produce the following materials to support the interview underpinned by a portfolio of evidence:

• independent assessor assessment materials which include:
  • training materials
  • administration materials
  • moderation and standardisation materials
  • guidance materials
  • grading guidance
  • question bank
• EPA guidance for the apprentice and the employer

The EPAO must ensure that the EPA materials are subject to quality assurance procedures including standardisation and moderation.

Overview

The project assessment method involves the apprentice completing a significant and defined piece of work that has a real business application and benefit. This process may include for example, research, analysis and the completion of tasks or activities to achieve the outcome. The assessment method will have an output at the end of the defined piece of work. The work completed for the project assessment method must meet the needs of the employer’s business and be relevant to the apprentice’s occupation and apprenticeship.

This assessment method has 2 components:

• completion of the defined piece of work for the project with a project output

• completion of the defined piece of work for the question and answer session

Together, these components give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method. They are assessed by an independent assessor.

Rationale

This EPA method is being used because:

• it allows for a range of craft based activities to be demonstrated,
• it allows for assessment of KSBs that do not occur on a predicable or regular basis and may not naturally be assessed as part of the practical assessment.

Delivery

The apprentice must complete a project based on any of the following:

To ensure the project allows the apprentice to meet the KSBs mapped to this assessment method to the highest available grade, the EPAO must sign-off the project’s title and scope at the gateway to confirm it is suitable. The EPAO must refer to the grading descriptors to ensure that projects are pitched appropriately.

The project output must be in the form of a product.

The apprentice must start the project after the gateway. The employer should ensure the apprentice has the time and resources, within the project period, to plan and complete their project.

The apprentice may work as part of a team to complete the project, which could include internal colleagues or technical experts. The apprentice must however, complete their product unaided and they must be reflective of their own role and contribution. The apprentice and their employer must confirm this when the product is submitted.

Component 1: Product

The product must include at least:

an output of a ceramic product, using hand skills for the majority of the making process and includes at least the use of drawings or a prototype or model. For dye and print technicians one output must be a piece of fabric which has had techniques applied in response to a brief and one output must use an existing garment with effects applied to create a narrative.

The apprentice must:

• ceramics: make a ceramic product using a range of techniques and suitable materials,
• ceramics: devise a strategy for firing to ensure successful completion,
• ceramics: present appropriate proposals for transportation packaging,
• dye and print technician: apply techniques, fixings and finishings in line with the brief,
• dye and print technician: apply effects to create a narrative in line with the brief.

The apprentice must complete and submit the product to the EPAO by the end of week 7 of the EPA period. The apprentice must produce and include a mapping, showing how the product evidences the KSBs mapped to this assessment method.

Component 2: Question and answer session

The question and answer session must be structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method to the highest available grade.

The apprentice must be questioned about their project and product.

The question and answer session must last for 30 minutes. The independent assessor must use the full time available for questioning and they can increase the total time by up to 10%. This time is to allow the apprentice to respond to a question if necessary.

The independent assessor must ask at least 6 questions. They must use the questions from their EPAO’s question bank or create their own questions in line with the EPAO’s training. Follow up questions are allowed where clarification is required.

The purpose of the independent assessor's questions is:

• to verify that the activity was completed by the apprentice
• to seek clarification where required
• to assess those KSBs that the apprentice did not have the opportunity to demonstrate with the product, although these should be kept to a minimum
• to assess level of competence against the grading descriptors

The independent assessor must have at least 1 weeks to review the product before the question and answer session, to allow them to prepare questions.

The apprentice must be given at least 1 weeks’ notice of the question and answer session.

The apprentice may choose to end the question and answer session early. The apprentice must be confident they have demonstrated competence against the assessment requirements for the assessment method. The independent assessor or EPAO must ensure the apprentice is fully aware of all assessment requirements. The independent assessor or EPAO cannot suggest or choose to end the assessment methods early, unless in an emergency. The EPAO is responsible for ensuring the apprentice understands the implications of ending an assessment early if they choose to do so. The independent assessor may suggest the assessment continues. The independent assessor must document the apprentice’s request to end the assessment early.

Assessment decision

The independent assessor must make the grading decision. They must assess the project components holistically when deciding the grade.

The independent assessor must keep accurate records of the assessment. They must record:

• the KSBs demonstrated in the product and question and answer session
• the apprentice’s answers to questions
• the grade achieved

Assessment location

The question and answer session must take place in a suitable venue selected by the EPAO for example, the EPAO’s or employer’s premises. It should take place in a quiet room, free from distractions and influence.

The question and answer session can be conducted by video conferencing. The EPAO must have processes in place to verify the identity of the apprentice and ensure the apprentice is not being aided.

Question and resource development

The EPAO must develop a purpose-built assessment specification and question bank. It is recommended this is done in consultation with employers of this occupation. The EPAO must maintain the security and confidentiality of EPA materials when consulting with employers. The assessment specification and question bank must be reviewed at least once a year to ensure they remain fit-for-purpose.

The assessment specification must be relevant to the occupation and demonstrate how to assess the KSBs mapped to this assessment method. The EPAO must ensure that questions are refined and developed to a high standard. The questions must be unpredictable. A question bank of sufficient size will support this.

The EPAO must ensure that the apprentice has a different set of questions in the case of re-sits or re-takes.

EPAO must produce the following materials to support the project:

• independent assessor EPA materials which include:
  • training materials
  • administration materials
  • moderation and standardisation materials
  • guidance materials
  • grading guidance
  • question bank
• EPA guidance for the apprentice and the employer

The EPAO must ensure that the EPA materials are subject to quality assurance procedures including standardisation and moderation.

Performance in the EPA determines the apprenticeship grade of:

• fail

• pass

• merit

• distinction

An independent assessor must individually grade the: interview underpinned by a portfolio of evidence and project with questioning in line with this EPA plan.

The EPAO must combine the individual assessment method grades to determine the overall EPA grade.

If the apprentice fails one or more assessment methods, they will be awarded an overall fail. 

To achieve an overall pass, the apprentice must achieve at least a pass in all the assessment methods. To achieve an overall merit, the apprentice must achieve a pass in the interview supported by a portfolio of evidence and a distinction in the project and questioning or the apprentice must achieve a distinction in the interview supported by a portfolio of evidence and a pass in the project and questioning . To achieve an overall EPA distinction, the apprentice must achieve a distinction in all assessment methods.

Grades from individual assessment methods must be combined in the following way to determine the grade of the EPA overall.

If the apprentice fails one assessment method or more, they can take a re-sit or a re-take at their employer’s discretion. The apprentice’s employer needs to agree that a re-sit or re-take is appropriate. A re-sit does not need further learning, whereas a re-take does. The apprentice should have a supportive action plan to prepare for a re-sit or a re-take.

The employer and the EPAO should agree the timescale for a re-sit or re-take. A re-sit is typically taken within 3 months of the EPA outcome notification. The timescale for a re-take is dependent on how much re-training is required and is typically taken within 6 months of the EPA outcome notification.

If the apprentice fails the project assessment method, they must amend the project output in line with the independent assessor’s feedback. The apprentice will be given 2 weeks to rework and submit the amended product.

Failed assessment methods must be re-sat or re-taken within a 6-month period from the EPA outcome notification, otherwise the entire EPA will need to be re-sat or re-taken in full.

Re-sits and re-takes are not offered to an apprentice wishing to move from pass to a higher grade.

The apprentice will get a maximum EPA grade ofif pass they need to re-sit or re-take one or more assessment methods, unless the EPAO determines there are exceptional circumstances.

The EPAO must have reasonable adjustments arrangements for the EPA.

This should include:

• how an apprentice qualifies for a reasonable adjustment
• what reasonable adjustments may be made

Adjustments must maintain the validity, reliability and integrity of the EPA as outlined in this EPA plan.

Special considerations

The EPAO must have special consideration arrangements for the EPA.

This should include:

• how an apprentice qualifies for a special consideration
• what special considerations will be given

Special considerations must maintain the validity, reliability and integrity of the EPA as outlined in this EPA plan.

Internal quality assurance refers to the strategies, policies and procedures that an EPAO must have in place to ensure valid, consistent and reliable EPA decisions.

EPAOs for this EPA must adhere to the requirements within the roles and responsibilities table.

They must also appoint independent assessors who:

• have recent relevant experience of the occupation or sector to at least occupational level 3 gained in the last 5 years or significant experience of the occupation or sector
• meet the following minimum requirements:

  they should have practised their occupational experience within the last 3 years. their skills and knowledge may be supported by academic experience.

Affordability of the EPA will be aided by using at least some of the following:

• utilising digital remote platforms to conduct applicable assessment methods

• using the employer’s premises

• conducting assessment methods on the same day

This apprenticeship is not aligned to professional recognition.