Key information

  1. Status: Approved for delivery (available for starts)
  2. Reference: ST0333
  3. Version: 1.1
  4. Level: 2
  5. Typical duration to gateway: 18 months
  6. Typical EPA period: 3 months
  7. Maximum funding: £16000
  8. Route: Construction and the built environment
  9. Date updated: 13/09/2023
  10. Approved for delivery: 21 February 2018
  11. Lars code: 234
  12. EQA provider: Ofqual
  13. Review: this apprenticeship will be reviewed in accordance with our change request policy.

Contents

Contents

Apprenticeship summary

Overview of the role

Applying insulation and cladding materials.

Occupation summary

This occupation is found within the Construction industry. Depending upon the industry sector Commercial Thermal Insulation Operatives may work on a diverse range of sites including:

  • process Plants (Chemical, food, brewing etc)
  • commercial Construction sites (Offices, Hotels, Schools, Leisure & Hospitals etc)
  • shipyards
  • power Generation (Oil, Gas, Nuclear etc)

The broad purpose of the occupation for Thermal Insulation Operative is to apply insulation materials and pre-formed metal cladding or other finishing materials for the prevention of heat loss, heat gain, energy efficiency and personnel protection either on a construction site or within a workshop.

In their daily work a commercial thermal insulation operative will be involved in the installation and application of appropriate thermal insulation materials, considering the specific surface types and the changing temperature and site conditions.  The operative will apply pre-formed metal cladding or other finishing materials in line with the job specification and site instructions. When in a refurbishment environment, additional preparation tasks may be required e.g. removal of existing materials, cleaning down of and appropriate preparation of surfaces. 

An employee in this occupation can expect to work under supervision, or where appropriate, on their own initiative.

 

Typical job titles include:

Commercial thermal insulation operative

End-point assessment summary

ST0333, Commercial thermal insulation operative level 2

This is a summary of the key things that you – the apprentice and your employer need to know about your end-point assessment (EPA). You and your employer should read the EPA plan for the full details. It has information on assessment method requirements, roles and responsibilities, and re-sits and re-takes.

What is an end-point assessment and why it happens

An EPA is an assessment at the end of your apprenticeship. It will assess you against the knowledge, skills, and behaviours (KSBs) in the occupational standard. Your training will cover the KSBs. The EPA is your opportunity to show an independent assessor how well you can carry out the occupation you have been trained for.

Your employer will choose an end-point assessment organisation (EPAO) to deliver the EPA. Your employer and training provider should tell you what to expect and how to prepare for your EPA.

The length of the training for this apprenticeship is typically 18 months. The EPA period is typically 3 months.

The overall grades available for this apprenticeship are:

  • fail
  • pass
  • distinction


EPA gateway

The EPA gateway is when the EPAO checks and confirms that you have met any requirements required before you start the EPA. You will only enter the gateway when your employer says you are ready.

The gateway requirements for your EPA are:

  • achieved English and mathematics qualifications in line with the apprenticeship funding rules
  • for the interview underpinned with a portfolio of evidence, you must submit a a portfolio of evidence

Assessment methods

Practical assessment with questions

You will be observed by an independent assessor completing a set of tasks. It will last 12 hours. They will ask you at least 5 questions.


Interview underpinned by a portfolio of evidence

You will have an interview with an independent assessor. It will last at least 60 minutes. They will ask you at least 8 questions. The questions will be about certain aspects of your occupation. You need to compile a a portfolio of evidence before the EPA gateway. You can use it to help answer the questions.


Multiple-choice test

You will complete a multiple-choice test. It will be closed book, meaning you will not have access to any books or reference materials.

The test will have 30 multiple-choice questions. You will have 60 minutes to complete it.



Who to contact for help or more information

You should speak to your employer if you have a query that relates to your job.

You should speak to your training provider if you have any questions about your training or EPA before it starts.

You should receive detailed information and support from the EPAO before the EPA starts. You should speak to them if you have any questions about your EPA once it has started.Reasonable adjustments

If you have a disability, a physical or mental health condition or other special considerations, you may be able to have a reasonable adjustment that takes this into account. You should speak to your employer, training provider and EPAO and ask them what support you can get. The EPAO will decide if an adjustment is appropriate.

Content loading...
Content loading...
Employers involved in creating the standard: Cambridge Regional College, Altrad, CGB Humbertherm, Envirotherm, Essex Thermal, Kaefer Ltd, Powertherm Contract Services, TICA

Version log

Version Change detail Earliest start date Latest start date
1.1 Occupational standard, end-point assessment plan and funding band revised. 12/10/2023 Not set
1.0 Approved for delivery 21/02/2018 11/10/2023

Crown copyright © 2025. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence

Is this webpage useful?

Thank you for your feedback

Tell us about your experience