This occupational standard and end-point assessment plan has been updated to align to the General Dental Council's Standards of Practice. The latest agreed version is ST1432 Dental technician (GDC 2023).
ST0108 version 1.4 will be available for new starts until 31 August 2025.
Designing, manufacturing, modifying and repairing custom-made dental appliances.
Dental Technician
5
36 months
Dental Technicians design, manufacture, modify and repair custom-made dental appliances. Typically the work is undertaken in a dental laboratory on a prescription from a dentist. The work can broadly be split into crown & bridge, dentures and orthodontics; most labs specialise in one or two of these areas but during the apprenticeship Dental Technicians will develop competency across all disciplines from start to finish before choosing if/where to specialise once they are qualified.
Dental Technicians tread a fine line between art and science; they manufacture precise custom-made medical appliances but require the attention to detail, colour and manual dexterity that is expected of fine artists.
Dental Technicians are registered professionals and work within the standards and scope of practice defined by the General Dental Council (GDC) Scope of practice Document September 2013 http://www.gdc- uk.org/Newsandpublications/Publications/Publications/Scope%20of%20Practice%20September%202013.pdf
Working as part of the Dental Team Dental Technicians will need to comply with professional regulation, collaborate with dental practices and occasionally meet patients. Dental Technicians will be able to work with minimum supervision and are responsible for the quality of their finished work before it is released to the dentist and patient.
|
Knowledge |
The Dental Technician will have knowledge of: |
|---|---|
|
Oral Anatomy |
Normal dental/oral anatomy and physiology. |
|
Dental devices and combating oral problems |
How design of custom-made devices can contribute to restoration of functionality as well as prevention of oral disease/further decline. |
|
Manufacturing Procedures |
The procedures used in design and manufacture of custom made devices - dentures, crowns, bridges, orthodontic (including Computer Aided Design (CAD)/ Computer Aided Manufacturing (CAM) & IT Solutions). |
|
Material Selection |
The principles regarding the selection and use of materials for use in custom made dental devices. |
|
The Dental Team and Professionalism |
The role of Dental Technician and other dental team members in management and leadership, professionalism and communication. |
|
Medical Devices Directive & GDC Guidelines |
Compliance with the Medical Devices Directive Council 93/42/EEC (MDD), GDC standards for Dental Team, Scope of practice http://www.gdc-uk.org/Newsandpublications/Publications/Publications/StudentFtPApril10web_260310[1 ].pdf |
|
Skills |
The Dental Technician will be able to: |
|---|---|
|
Appropriate Device Selection |
Advise the prescribing dentist on appropriate dental devices based on dentist input, while recognising oral limitations and their effect on devices. Evaluate, for individual patients, the need for more complex treatment and seek advice from the dentist or more experienced Dental Technicians as appropriate. |
|
Device Manufacture |
Design, manufacture, assess, repair, modify and provide biomechanically sound custom- made dental devices in the following three areas: |
|
1.Prosthetic Device Manufacture (Dentures) |
Design and manufacture complete and partial removable prosthesis, including the provision of custom made impression trays |
|
2.Conservation Device Manufacture (Crown/Bridge) |
Produce models and dies for conservation work Design and manufacture single metallic and tooth coloured restorations Create substructures for bridgework and apply tooth coloured materials for permanent restorations |
|
3.Orthodontic Device Manufacture (Braces) |
Produce models for Orthodontic case study purposes and appliance construction Design and manufacture removable, functional and fixed orthodontic appliances |
|
Digital Manufacturing Procedures |
Aware of the basic procedures used in design and manufacture of custom made devices (including CAD/CAM & IT Solutions). |
|
Device Assessment |
Assess impressions, models and finished devices as well as the fitness for purpose of devices and propose alternatives where necessary, in line with patient prescription, and formally record these decisions as for MDD requirements Can review and Quality Assure the devices |
|
Implants and attachments |
Aware of basic procedures for the use of implants, milling and precision attachments as used with various forms of custom made dental restorations |
|
Communication |
Communicate effectively with and about patients, their representatives and the rest of the dental team. Handle complaints effectively and within GDC guidelines. |
|
Decontamination & Infection Control |
Manage safety, infection control and decontamination risks around the dental laboratory in keeping with current regulations |
|
Behaviours |
What is required |
|---|---|
|
Continuing Personal Development |
Proactive in their own development, willing to commit to lifelong learning by use of a Personal Development Plan (PDP), personal reflection and continuous improvement. |
|
Ethical/Legal Awareness |
Recognise and act within GDC standards, ethical guidance, information governance and relevant laws. |
|
Collaboration |
Willing to give and receive feedback effectively and tactfully within the wider dental team; takes responsibility for establishing personal networks with dental professionals, specialists and other relevant individuals and organisations. |
|
Responsibility & Integrity |
Ready to take responsibility for integrity of completed work. |
Individual employers will set the selection criteria for their apprentices. Most candidates will have A levels or existing
relevant Level 3 qualifications. Other relevant or prior experience may also be considered as an alternative. Employers who recruit candidates without English and Maths GCSE at Grade C or above (or approved equivalent) must ensure that the candidate achieves this standard prior to the completion of the apprenticeship.
Level 5 Foundation Degree Science in Dental Technology
On completion of the apprenticeship the apprentice can apply to register with the General Dental Council as a Dental
Technician, by virtue of an acceptable qualification accredited by the GDC.
Note: To meet the requirements for registration the competencies and associated curriculum will be used in conjunction with the learning outcomes detailed in the GDC document ‘Preparing for Practice.’(http://www.gdc-uk.org/newsandpublications/publications/publications/gdc%20learning%20outcomes.pdf)
The education and training providers must be compliant with the GDC Standards, Student fitness to practice and requirements for providers of education and training programmes.
The apprenticeship should be reviewed after a maximum of 3 years (duration of Apprenticeship).
The guidance from the General Dental Councils quality assurance section will also inform the continuing development and updating of the Apprenticeship.
This is a Regulated occupation.
General Dental Council
Training provider must be approved by regulator body
EPAO must be approved by regulator body
Crown copyright © 2024. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence
General Dental Council
Training provider must be approved by regulator body
EPAO must be approved by regulator body
| Version | Change detail | Earliest start date | Latest start date |
|---|---|---|---|
| 1.4 | End-point assessment plan and funding band revised but funding stayed the same. | 12/07/2023 | Not set |
| 1.3 | End-point assessment plan revised | 09/08/2019 | 11/07/2023 |
| 1.2 | End-point assessment plan revised | 28/03/2019 | 08/08/2019 |
| 1.1 | End-point assessment plan revised | 28/03/2019 | 27/03/2019 |
| 1.0 | Approved for delivery | 26/03/2015 | 27/03/2019 |