This is not the latest approved version of this apprenticeship. View the latest version
This apprenticeship has been retired
A temporary dispensation has been applied to the assessment plan version ST0855/V1.0 for this apprenticeship.
This dispensation applies to 16 Airbus apprentices progressing through gateway during July 2024, for which exceptional circumstances exist. It will commence on 22 July 2024 and end on 20 December 2024, when it will be withdrawn.
The end-point assessment organisation (EPAO) delivering the EPA for the apprentices will implement the dispensation as agreed by IfATE, supported and monitored by the relevant EQA provider (EQAP).
A new, separate qualification is created.
This will:
- be titled ST0855 EAL Level 4 Space engineering technician (skills and behaviours)
- contain only 2 assessment methods (the observation and interview assessment methods)
- not contain the multiple-choice test
- aggregate grades such that the observation and interview must be passed to achieve a pass overall; a distinction in either assessment method achieves a merit overall; and a distinction in both assessment methods achieves a distinction overall
Apprentices are still expected to have covered the full programme of study.
Support the development, manufacturing, assembly, integration and testing of complex, high value space hardware and ground-based equipment.
This occupation is found in the space sector, and specifically the "upstream" (manufacturing) area, which covers the design and production of satellites and the components and subsystems they comprise, along with production, operation and maintenance of highly specialised ground support equipment which does not fly in space but is used to support development and testing of satellites before launch.
BACKGROUND INFORMATION
The upstream element of the industry is part of the overall space sector and is related to but distinct from the "downstream" part of the sector, which is concerned with the exploitation of data from satellites for end-user applications including weather forecasting and telecommunications. Income for the whole UK space sector has grown significantly and the upstream segment has been the majority contributor to the overall growth of the sector. This growth and the future predictions means there will be a significant increase in demand for these specialist skills to support the UK Space manufacturing sector. Space is a key part of the UK’s Industrial Strategy supporting the development and increases in productivity of other key sectors (e.g. Agribusiness, Transport and Health, through improve data provision and communications). Government has committed funding to new developments supporting the upstream sector through investments to establish UK space ports, a satellite launch capability and an investment in the National Satellite Test Facility at Harwell. The broad purpose of the occupation is to support the development, manufacturing, assembly, integration and testing of complex, high value space hardware and ground-based equipment. For example, satellite mechanical structures, and subsystems for in-space power generation and distribution, spacecraft attitude control, thermal control, rocket propulsion, space communication, sensors, planetary landers, and associated support systems. Space technicians interpret drawings/specifications and formal procedures imposed by the employer and customers (for example Space Agencies) to plan and perform their work. They use sector-specific techniques for many tasks, for example electronics board soldering, which is carried out using processes and standards developed specifically for space applications. They contribute to inspection and testing activities for mission-critical satellites and sub-assemblies, and support activities such as integration and testing of assemblies at space technology centres and launch sites overseas. In their daily work, an employee in this occupation interacts with line managers/supervisors, procurement officers, systems engineers, spacecraft subsystems experts, commercial and export managers, and the overall team working on a particular satellite or mission. They interact with customers (for example, space agencies and satellite operators) during site visits. Space technicians typically work in secure and controlled environments, workshops and development areas, as well as regular offices. An employee in this occupation will be responsible for the quality and accuracy of the work they undertake within the limits of their personal authority. They adhere to statutory regulations and organisational health and safety requirements, and have an awareness of, and carry out work in compliance with, standards imposed by key customers (for example space agencies) and regulatory bodies such as the International Organization for Standardization (ISO) or The European Cooperation for Space Standardization (ECSS).
Typical entry requirement is a minimum of 5 GCSE's Including English, Mathematics and Science-based subjects in C-A* or 4-9 except mathematics (B-A* or 6-9)
| Duty | KSBs |
|---|---|
|
Duty 1 Plan, prepare and carry out inspection, fabrication or assembly of spacecraft components and subsystems to meet required specification and quality requirements in appropriately controlled environments. |
|
|
Duty 2 Deal with problems that occur within the activity (such as unexpected behaviour of a component or assembly, incorrect fitting of parts or missing procedural information in a process being undertaken) in line with responsibilities of the role in a structured and controlled approach. |
|
|
Duty 3 Complete documentation (such as Non Conformance Reports and Technical Build Records) at the appropriate stages of the work activity. |
|
|
Duty 4 Review processes and procedures to identify improvements to quality and efficiency of e.g. products and processes, including the generation of Engineering Change Requests. |
|
|
Duty 5 Contribute to definition of spacecraft and subsystem Integration / Validation / Verification & Qualification plans, procedures and presentation of test results to support correlation including space-specific testing such as vibration, thermal vacuum and electromagnetic compatibility testing. |
|
|
Duty 6 Carry out Integration and Testing activities at subsystem and spacecraft, launch vehicle and ground level (for example, performing a functional test of a communications subsystem; participating in the installation of a subsystem within the complete spacecraft; monitoring of subsystems during comprehensive system testing). |
|
|
Duty 7 Operate equipment, subsystems and systems (such as analysis tools, ground support equipment and flight assemblies) in compliance with written operational procedures. |
|
|
Duty 8 Build and test precision components and assemblies such as electronics boards, deployment mechanisms and fuel/cooling pipework to design specifications. |
|
|
Duty 9 Carry out inspection activities on equipment, components and systems (for example, use of microscopes to inspect electronics assemblies; helium leak testing of thermal-vacuum chambers, thermal cycling and optical alignment). |
|
|
Duty 10 Monitor, test, fault-find and maintain manufacturing plant and equipment (such as thermal vacuum chambers, composite layup systems, and soldering stations) and carry out scheduled service activities on production infrastructure. |
K1: Spacecraft Systems including power, attitude control, thermal, communications, data handling and propulsion.
Back to Duty
K2: Engineering mathematical and scientific principles, methods, techniques, graphical expressions, symbols, formulae and calculations including: reference frame definitions, tolerancing, torque settings.
Back to Duty
K3: Relationships between customers, partners & suppliers in the international space engineering and manufacturing sector.
Back to Duty
K4: Space system assembly, integration and test procedures, processes, techniques and tools such as vibration, thermal-vacuum, electromagnetic compatibility.
Back to Duty
K5: Purpose of approved processes, components, parts and materials lists and verification control documentation.
Back to Duty
K6: Ground Support Equipment and Systems including electrical/electronic test equipment and mechanical handling equipment.
Back to Duty
K7: Mechanical, Electrical and Electronic Analysis & Testing principles, including space industry-specific test standards.
Back to Duty
K8: Properties, handling and application of space qualified materials including Electrostatic Discharge (ESD) precautions.
Back to Duty
K9: Quality and Product Assurance principles in space projects.
Back to Duty
K10: Principles, processes and techniques for thermal-vacuum, electromagnetic compatibility, shock, vibration and acoustic testing.
Back to Duty
K11: Principles of Additive Manufacturing for application in space including powder quality and repeatability of build.
Back to Duty
K12: Configuration and Document Management Control Processes including issue control, incorporation of change and End Item Data Pack.
Back to Duty
K13: Adhesives, bonding, soldering and fastening techniques required to meet space qualification standards.
Back to Duty
K14: The space environment including thermal, vacuum, radiation, atomic oxygen and launch operations.
Back to Duty
K15: Precision and uncertainty in measurement systems, including limitations and appropriate use.
Back to Duty
K16: Vacuum and pressurised systems and measurement.
Back to Duty
K17: Disciplines and handling in cleanliness and contamination-controlled environments.
Back to Duty
K18: Application of Risk Assessment at point of work.
Back to Duty
S1: Prepare and complete documentation including work instruction, build and change records, risk assessments and non-conformance reports in compliance with applicable space industry processes and standards.
Back to Duty
S2: Contribute to technical reviews such as assembly, integration and test readiness, and non-conformance reviews.
Back to Duty
S3: Assemble, integrate and test at equipment, subsystem and system level.
Back to Duty
S4: Support and maintain ground support systems for spacecraft and subsystems.
Back to Duty
S5: Interpret outputs from manufacturing software such as Computer Aided Design (CAD) / Computer Aided Manufacture (CAM) and Product Data Management / Product Lifecycle Management (PDM/PLM).
Back to Duty
S6: Solve problems using procedures and methodologies commonly applied in the space engineering sector, such as Failure Mode and Effects Analysis (FMEA), Plan-Do-Check-Act (PDCA) Cycle, 8-Disciplines (8D), Ishikawa/Fishbone Diagrams.
Back to Duty
S7: Contribute to the definition of space engineering process improvement plans.
Back to Duty
S8: Use internal and external Quality Management Systems including Non-Conformance Reports (NCRs), Production Documentation, and published standards applicable to space engineering and manufacture such as EN9100, ISO9001.
Back to Duty
S9: Read, extract and interpret technical documentation (such as workplans/project plans, schedules, drawings, test plans, specifications, production data, quality reports, costing data, statistical information, assembly instructions and requirements) drawing accurate conclusions and making informed decisions, seeking clarification where required.
Back to Duty
S10: Perform electrical and electronic measurement and testing using equipment such as voltmeters, spectrum analysers, oscilloscopes.
Back to Duty
S11: Perform appropriate joining techniques for example using adhesives, bonding, plating, soldering and fastening, following procedures for space quality standards.
Back to Duty
S12: Carry out assembly and functional testing of products such as electronics boards and mechanical assemblies, to design specifications and space industry standards.
Back to Duty
S13: Inspect electrical, mechanical or electronic equipment for quality assurance purposes.
Back to Duty
S14: Use CAD software to create 3D models and part drawings to enable manufacture of components for spacecraft systems and ground support equipment.
Back to Duty
S15: Apply space industry procedures in facilities such as cleanrooms, workshops and testing facilities (for example, ECSS-Q-ST-70-50C: Particles contamination monitoring for spacecraft systems and cleanrooms) in compliance with legislative and company Health, Safety and Environment requirements.
Back to Duty
S16: Measure, test and analyse, using instruments such as pressure gauges, micrometers, balances and non-contact approaches.
Back to Duty
S17: Use and maintain vacuum and pressure systems for space applications (such as environmental test chambers, pressure-fed propulsion systems, and gas supply lines for manufacturing & testing) including associated processes and documentation such as Piping & Instrumentation Diagrams.
Back to Duty
S18: Use and maintain cryogenic systems for space applications (such as propulsion, subsystem thermal control and ground support activities) including associated processes and documentation, in compliance with legislative and company Health, Safety and Environment requirements.
Back to Duty
S19: Communicate using verbal and written methods such as for formal and informal presentations, written reports and electronic dissemination, adjusting approach to take account of equality and diversity considerations, and listen to others.
Back to Duty
B1: Takes personal responsibility and is resilient. For example, disciplined and responsible approach to risk, works diligently regardless of how much they are being supervised, accepts responsibility for managing their own time and workload and stays motivated and committed when facing challenges.
Back to Duty
B2: Focuses on quality and problem solving. For example, demonstrates attention to detail and seeks opportunities to improve quality, speed and efficiency.
Back to Duty
B3: Committed to continuous personal improvement. For example, reflects on skills, knowledge and behaviours and seeks opportunities to develop, adapts to different situations, environments or technologies and has a positive attitude to feedback and advice.
Back to Duty
B4: Is responsible and accountable. For example, is present in the workplace at the required times, completes all assigned tasks and takes responsibility for the duties assigned to the role. Shows a desire to succeed, approaches difficult or challenging problems with enthusiasm, shows initiative and supports the success of the team/organisation.
Back to Duty
B5: Performs through co-operation and works effectively in teams. For example, has a clear understanding of role; voluntarily engages in open communication with team colleagues and line management; identifies individual contributions that can be made to reach collective goals; supports meetings and work sessions on request. Adopts a positive attitude to working with others, and supports discussion with facts and logic, and considers implications of their actions on other people and the business.
Back to Duty
B6: Interacts appropriately with stakeholders. For example, works to understand stakeholder requirements and perspectives, and can present work positively and with confidence.
Back to Duty
B7: Uses a safety-first approach in order to comply with legislative and company Health, Safety and Environment requirements.
Back to Duty
Apprentices without level 2 English and maths will need to achieve this level prior to taking the End-Point Assessment. For those with an education, health and care plan or a legacy statement, the apprenticeship’s English and maths minimum requirement is Entry Level 3. A British Sign Language (BSL) qualification is an alternative to the English qualification for those whose primary language is BSL.
This standard aligns with the following professional recognition:
4
48
this apprenticeship will be reviewed in accordance with our change request policy.
| Version | Change detail | Earliest start date | Latest start date |
|---|---|---|---|
| 1.1 | End-point assessment plan revised | 25/04/2023 | Not set |
| 1.0 | Approved for delivery | 24/08/2020 | 24/04/2023 |
Crown copyright © 2024. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence