V1.0
This document explains the requirements for end-point assessment (EPA) for the data engineer apprenticeship. End-point assessment organisations (EPAOs) must follow this when designing and delivering the EPA.
Data engineer apprentices, their employers and training providers should read this document.
A full-time data engineer apprentice typically spends 24 months on-programme (this means in training before the gateway). The apprentice must spend at least 12 months on-programme and complete the required amount of off-the-job training in line with the apprenticeship funding rules.
The apprentice must complete their training and meet the gateway requirements before starting their EPA. The EPA will assess occupational competence.
An approved EPAO must conduct the EPA for this apprenticeship. Employers must select an approved EPAO from the register of end-point assessment organisations (RoEPAO).
This EPA has 2 assessment methods.
The grades available for each assessment method are below.
Assessment method 1 - project evaluation report, presentation and questions:
Assessment method 2 - professional discussion:
The result from each assessment method is combined to decide the overall apprenticeship grade. The following grades are available for the apprenticeship:
The EPA is taken in the EPA period. The EPA period starts when the EPAO confirms the gateway requirements have been met and is typically 4 months.
The EPAO should confirm the gateway requirements have been met and start the EPA as quickly as possible.
The apprentice’s employer must be content that the apprentice has attained sufficient KSBs to complete the apprenticeship. The employer may take advice from the apprentice's training provider, but the employer must make the decision. The apprentice will then enter the gateway.
The apprentice must meet the gateway requirements before starting their EPA.
They must:
The apprentice must submit the gateway evidence to their EPAO, including any organisation specific policies and procedures requested by the EPAO.
The assessment methods can be delivered in any order.
The result of one assessment method does not need to be known before starting the next.
A project involves the apprentice completing a significant and defined piece of work that has a real business application and benefit. The project must meet the needs of the employer’s business and be relevant to the apprentice’s occupation and apprenticeship.
The agreed project will present a typical business task, appropriate for demonstrating the skills and knowledge on the standard. The agreed project will be comparable in terms of content and complexity for all apprentices - it is the context within which the knowledge, and skills must be demonstrated that will vary. The project is undertaken and completed on programme and pre-gateway to the EPA. The project itself is not part of the EPA. The project will typically be undertaken on the employer’s premises.
This assessment method has 2 components:
project with a project output
presentation with questions and answers
Together, these components give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method. They are assessed by an independent assessor.
This assessment method is being used because:
A project evaluation report is the most valid method as it allows the demonstration of professional competence.
The project is based on a real life example of the apprentices’ everyday work in their industry. Therefore, ensuring that they can demonstrate the KSBs in practice.
Producing a project evaluation report and presentation reflects normal professional practice, so this assessment method is appropriate.
Apprentices are required to be concise and precise in their use of language in written and verbal communication.
The project evaluation report offers a realistic opportunity to combine project management, examples of data products and formal writing enabling the apprentice to reflect on approaches taken.
It is a holistic assessment method, allowing the apprentice to demonstrate KSBs in an integrated way.
By writing the evaluation report on the project and being questioned to understand rationale for choices made, risks and problems identified, resolutions and areas where further action could be required. This method will enable the apprentice to showcase their professional competency.
The project is completed before gateway and is not graded. The project evaluation report is assessed and must be completed after gateway.
The apprentice must complete a project based on any of the following:
To ensure the project allows the apprentice to meet the KSBs mapped to this assessment method to the highest available grade, the EPAO must sign-off the project’s title and scope at the gateway to confirm it is suitable. The EPAO must refer to the grading descriptors to ensure that projects are pitched appropriately.
The project output must be in the form of a report and presentation.
The apprentice must start the project before gateway. The project evaluation report must be completed after gateway. The employer should ensure the apprentice has the time and resources, to plan and complete their project.
The apprentice may work as part of a team to complete the project, which could include internal colleagues or technical experts. The apprentice must however, complete their project report and presentation unaided and they must be reflective of their own role and contribution. The apprentice and their employer must confirm this when the report and any presentation materials are submitted.
The report must include at least:
The report must also include:
To ensure the project allows the apprentice to meet the KSBs mapped to this assessment method to the highest available grade, the EPAO should sign-off the project evaluation report's title and scope at the gateway to confirm it is suitable.
The project output must be in the form of an evaluation report.
The apprentice must start the project evaluation report after the gateway. They must complete and submit the report to the EPAO by the end of week 10 of the EPA period.
The employer should ensure the apprentice has the time and resources, within this period, to plan and complete their project evaluation report. The apprentice must complete their project evaluation report and the production of its components unaided.
The apprentice may work as part of a team to complete the project which could include technical internal or external support. However, the project evaluation report must be the apprentice’s own work and reflective of their own role and contribution. The apprentice and their employer must confirm that the project evaluation report is the apprentice’s own work when it is submitted.
The project report must have a word count of 3500 words. A tolerance of 10% above or below is allowed at the apprentice’s discretion. Appendices, references and diagrams are not included in this total. The apprentice must produce and include a mapping in an appendix, showing how the report evidences the KSBs mapped to this assessment method.
The apprentice must complete and submit the report and any presentation materials to the EPAO by the end of week 10 of the EPA period.
The presentation with questions must be structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method to the highest available grade.
The apprentice must prepare and deliver a presentation to an independent assessor. After the presentation, the independent assessor must ask the apprentice questions about their project, report and presentation.
The presentation should cover:
The presentation with questions must last 50 minutes. This will typically include a presentation of 20 minutes and questioning lasting 30 minutes. The independent assessor must use the full time available for questioning. The independent assessor can increase the time of the presentation and questioning by up to 10%. This time is to allow the apprentice to complete their last point or respond to a question if necessary.
The independent assessor must ask at least 6 questions. They must use the questions from the EPAO’s question bank or create their own questions in line with the EPAO’s training. Follow up questions are allowed where clarification is required.
The purpose of the independent assessor's questions is:
The apprentice must submit any presentation materials to the EPAO at the same time as the report - by the end of week 10 of the EPA period. The apprentice must notify the EPAO, at that point, of any technical requirements for the presentation.
During the presentation, the apprentice must have access to:
The independent assessor must have at least 2 weeks to review the project report and any presentation materials, to allow them to prepare questions.
The apprentice must be given at least 2 weeks’ notice of the presentation with questions.
The independent assessor must make the grading decision. They must assess the project components holistically when deciding the grade.
The independent assessor must keep accurate records of the assessment. They must record:
The presentation with questions must take place in a suitable venue selected by the EPAO for example, the EPAO’s or employer’s premises. It should take place in a quiet room, free from distractions and influence.
The presentation with questions can be conducted by video conferencing. The EPAO must have processes in place to verify the identity of the apprentice and ensure the apprentice is not being aided.
The EPAO must develop a purpose-built assessment specification and question bank. It is recommended this is done in consultation with employers of this occupation. The EPAO must maintain the security and confidentiality of EPA materials when consulting with employers. The assessment specification and question bank must be reviewed at least once a year to ensure they remain fit-for-purpose.
The assessment specification must be relevant to the occupation and demonstrate how to assess the KSBs mapped to this assessment method. The EPAO must ensure that questions are refined and developed to a high standard. The questions must be unpredictable. A question bank of sufficient size will support this.
The EPAO must ensure that the apprentice has a different set of questions in the case of re-sits or re-takes.
EPAO must produce the following materials to support the project:
The EPAO must ensure that the EPA materials are subject to quality assurance procedures including standardisation and moderation.
In the professional discussion, an independent assessor and apprentice have a formal two-way conversation. It gives the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method.
This assessment method is being used because:
It provides the apprentice with the opportunity to discuss and show case their depth of understanding the knowledge, skills and behaviours that may not naturally occur as part of the project.
It allows the independent assessor to consider the context and sector that the apprentice operates within, giving flexibility to ensure that all the KSBs can be assessed appropriately.
The professional discussion is cost effective, and it allows consideration of the potential need to conduct the EPA remotely.
The professional discussion must be structured to give the apprentice the opportunity to demonstrate the KSBs mapped to this assessment method to the highest available grade.
An independent assessor must conduct and assess the professional discussion.
The apprentice may choose to end the assessment method early. The apprentice must be confident they have demonstrated competence against the assessment requirements for the assessment method. The independent assessor or EPAO must ensure the apprentice is fully aware of all assessment requirements. The independent assessor or EPAO cannot suggest or choose to end any assessment methods early unless in an emergency. The EPAO is responsible for ensuring the apprentice understands the implications of ending an assessment early if they choose to do so. The independent assessor may suggest the assessment continues. The independent assessor must document the apprentice’s request to end the assessment early.
The EPAO will ask ten questions, two for each of the themes:
The EPAO must give an apprentice 2 weeks' notice of the professional discussion.
The professional discussion must last for 80 minutes. The independent assessor can increase the time of the professional discussion by up to 10%. This time is to allow the apprentice to respond to a question if necessary.
The independent assessor must ask at least 10 questions. The independent assessor must use the questions from the EPAO’s question bank or create their own questions in line with the EPAO’s training. Follow-up questions are allowed where clarification is required.
The independent assessor must make the grading decision.
The independent assessor must keep accurate records of the assessment. They must record:
The professional discussion must take place in a suitable venue selected by the EPAO for example, the EPAO’s or employer’s premises.
The professional discussion can be conducted by video conferencing. The EPAO must have processes in place to verify the identity of the apprentice and ensure the apprentice is not being aided.
The professional discussion should take place in a quiet room, free from distractions and influence.
The EPAO must develop a purpose-built assessment specification and question bank. It is recommended this is done in consultation with employers of this occupation. The EPAO must maintain the security and confidentiality of EPA materials when consulting with employers. The assessment specification and question bank must be reviewed at least once a year to ensure they remain fit-for-purpose.
The assessment specification must be relevant to the occupation and demonstrate how to assess the KSBs mapped to this assessment method. The EPAO must ensure that questions are refined and developed to a high standard. The questions must be unpredictable. A question bank of sufficient size will support this.
The EPAO must ensure that the apprentice has a different set of questions in the case of re-sits or re-takes.
The EPAO must produce the following materials to support the professional discussion:
The EPAO must ensure that the EPA materials are subject to quality assurance procedures including standardisation and moderation.
Performance in the EPA determines the overall grade of:
An independent assessor must individually grade the project evaluation report, presentation and questions and professional discussion in line with this EPA plan.
The EPAO must combine the individual assessment method grades to determine the overall EPA grade.
If the apprentice fails one assessment method or more, they will be awarded an overall fail.
To achieve an overall pass, the apprentice must achieve at least a pass in all the assessment methods. Both assessment methods are weighted equally in their contribution to the overall EPA grade.
Grades from individual assessment methods must be combined in the following way to determine the grade of the EPA overall.
If the apprentice fails one assessment method or more, they can take a re-sit or a re-take at their employer’s discretion. The apprentice’s employer needs to agree that a re-sit or re-take is appropriate. A re-sit does not need further learning, whereas a re-take does. The apprentice should have a supportive action plan to prepare for a re-sit or a re-take.
The employer and the EPAO should agree the timescale for a re-sit or re-take. A re-sit is typically taken within 3 months of the EPA outcome notification. The timescale for a re-take is dependent on how much re-training is required and is typically taken within 6 months of the EPA outcome notification.
If the apprentice fails the project assessment method, they must amend the project output in line with the independent assessor’s feedback. The apprentice will be given 4 weeks to rework and submit the amended report.
Failed assessment methods must be re-sat or re-taken within a 6-month period from the EPA outcome notification, otherwise the entire EPA will need to be re-sat or re-taken in full.
Re-sits and re-takes are not offered to an apprentice wishing to move from pass to a higher grade.
The apprentice will get a maximum EPA grade of pass for a re-sit or re-take, unless the EPAO determines there are exceptional circumstances.
The EPAO must have reasonable adjustments arrangements for the EPA.
This should include:
Adjustments must maintain the validity, reliability and integrity of the EPA as outlined in this EPA plan.
Internal quality assurance refers to the strategies, policies and procedures that an EPAO must have in place to ensure valid, consistent and reliable EPA decisions.
EPAOs for this EPA must adhere to the requirements within the roles and responsibilities table.
They must also appoint independent assessors who:
Affordability of the EPA will be aided by using at least some of the following:
This apprenticeship is not aligned to professional recognition.
| Version | Change detail | Earliest start date | Latest start date |
|---|---|---|---|
| 1.0 | Approved for delivery | 11/12/2023 | Not set |
Crown copyright © 2025. You may re-use this information (not including logos) free of charge in any format or medium, under the terms of the Open Government Licence. Visit www.nationalarchives.gov.uk/doc/open-government-licence